[Update] Introduction of the RJ45 Interface | rj45 – Pickpeup

rj45: คุณกำลังดูกระทู้

Introduction of the RJ45 Interface



September 27, 2012

Cables transmit information along the length. Only the right connection to an RJ45 interface or RJ45 connector will realize the transmission. And the cable run needs a connector termination, requiring a jack, normally an RJ45 jack, to plug into. RJ45 connectors are commonly seen with Ethernet network cables. Ethernet cables with RJ45 connectors are also called RJ45 cables. These RJ45 cables feature a small plastic plug on each end, and the plugs are inserted into RJ45 jacks of Ethernet devices. What is RJ45? Are you confused about different RJ45 interface types? Keep reading to explore more.

What Is RJ45 Interface?

RJ45 interface is considered the most common twisted-pair connector for Ethernet cables and networks.

  • “RJ” means “registered jack” — a standardized telecommunication network interface for connecting voice and data equipment to a service provided by a local exchange carrier or long-distance carrier.

  • “45” is the number of the interface standard.

Physically speaking, the connectors that registered jacks use are mainly the modular connector and 50-pin miniature ribbon connector types. RJ45 connector is an 8-position, 8-contact (8P8C) modular plug, and jack, applied for Ethernet-based local area networks (LAN). RJ45 cable plug is usually made of a plastic piece with eight pins on the port. Four of the pins are used for sending and receiving data, and the other four are used for other technologies or power networking devices.

RJ45 Interface

RJ45 Connector vs RJ11 Connector

Besides the RJ45 interface, some other connector types, like the RJ11 interface, for example, may confuse you in some cases. RJ11 has a 6P2C or 6P4C configuration and is used for wiring a single phone line. RJ45 adopts an 8P8C configuration. RJ45 vs RJ11, the major difference lies in the number of wires in their connectors. Take a closer look, you will find that RJ45 has 8 wires inside while Rj11 has 4 wires, resulting in RJ45’s bigger size than that of RJ11’s.

As abovementioned, with 2 or 4 of the 6 available connection points, the RJ11 plug supports limited-bandwidth applications including phone lines and ADSL connections. On the contrary, 8 contacts will allow greater bandwidth. Thus, RJ45 can be used for data-intensive applications like Ethernet and can support bandwidth up to 10Gbps. RJ45 is also sometimes used for VoIP phones in offices.

Check the table below to get a clear understanding of RJ11 vs RJ45.






(6 positions, 4 connectors)

(8 positions, 8 connectors)

Shape and Size

Compact, square-shaped

Longer, more rectangular


RJ11 connectors can support about 24Mbps

RJ45 connectors can support 10Gbps over Ethernet.


Phones, ADSL lines, modem cables.
RJ11 is mostly used for voice applications.

Computer networking.
RJ45 is typically used in Ethernets or connecting cable modems with Wi-Fi routers.


You cannot plug in an RJ45 connector to an RJ11 slot but the opposite is possible. Although the smaller size of RJ11 makes it easier to be plugged into the RJ45 slot, it is not recommended to do that since this may damage the device that adopts the RJ45 slot.

How to Identify RJ45 Interface Color Code?

T568A vs T568B are the two common wiring schemes, which are used to terminate the twisted-pair cable onto the connector interface. The two standards define how the RJ45 pinouts arrange the individual eight wires when linking the RJ45 connector to a cable. These wiring layouts have their own color convention to follow for electrical compatibility. The T-568B wiring scheme is considered to be the more commonly used one.

The differences between T568A vs T568B in color conventions are shown in the figure below.

T568A vs T568B

With regard to the two standards, there are two different connectivity forms. If both ends of the patch cords are wired on the basis of one standard, it is a straight-through connection. If not, it is a crossover connection. Some networking applications require a crossover Ethernet cable, which has a T-568A connector on one end and a T-568B connector on the other. This type of cable is typically used for direct computer-to-computer connections when there is no router, hub, or switch available.

Ethernet Cable Connecting to a PoE Switch

RJ45 Cable Types

Cables that terminated with RJ45 connectors on both ends called RJ45 Ethernet cables. Cat5, Cat6, and Cat7 cables are the most common RJ45 cables used in today’s network connection.

Cat5 vs Cat5e

Category 5 was originally designed to transmit at 100 MHz frequencies, providing a rated line speed of 100 Mbit/s. Cat 5 uses two twisted pairs (four contacts) with a max range of 100 meters. A Cate5e specification was later introduced with tighter specifications and standards. The new standard also required new cables to include all four twisted pairs.

Over short distances, under ideal signal conditions, and assuming they have four pairs, Cat5 and Cat5e patch cable are capable of transmitting at Gigabit Ethernet speeds. Gigabit Ethernet uses an optimized encoding scheme specifically intended for operation within these lower signal tolerances.

Cat6 vs Cat6a

Backward compatible with Cat5e, Category 6 has strict standards and significantly improved shielding. Cat6 cable was designed as the standard for Gigabit Ethernet, providing native speeds of up to 1000 Mbit/s over a frequency of 250 MHz. By reducing the maximum cable distance from 100 meters to 55 meters, 10 Gigabit Ethernet is supported.

Cat6a doubles the frequency to 500 MHz while continuing to reduce noise interference with grounded foil shielding. These improvements remove the cable distance penalty when operating in 10 Gigabit Ethernet.

Category 7

Operating at frequencies up to 600 MHz, Cat7 was designed specifically to support the rated speeds of 10 Gigabit Ethernet. In addition to the shielding introduced by Cat6e, this new specification provides individual shielding for each of the four twisted pairs. Cat7 has a maximum distance of 100 meters while maintaining backward compatibility with Cat5 and Cat6. Cat7a increases frequencies to 1000 MHz, providing an augmented specification capable of supporting future 40/100 Gigabit Ethernet speeds. The increase to 1000 MHz also allows for the transmittal of lower-frequency Cable TVstreams.

Further reading: Running 10GBASE-T Over Cat6 vs Cat6a vs Cat7 Cabling?

RJ45 Cable Applications

RJ45 connectors are the key part of Ethernet connectivity to transmit voice and data media. They were developed as much smaller and cheaper replacements to the older telephone installation methods of hardwired cords. The easy plug-n-play style reduces the difficulty of installation. Compared with RJ11, RJ45 is suitable for more applications, such as Ethernet networking, telecommunications, factory automation, and so on. It is frequently used for networking devices including Ethernet cables, modems, computers, laptops, printers, etc.

Bấm dây mạng không cần kìm chuyên dụng – Press Wire network not Plier

นอกจากการดูบทความนี้แล้ว คุณยังสามารถดูข้อมูลที่เป็นประโยชน์อื่นๆ อีกมากมายที่เราให้ไว้ที่นี่: ดูเพิ่มเติม

Bấm dây mạng không cần kìm chuyên dụng - Press Wire network not Plier

Cómo fabricar un cable Ethernet – Cómo hacer un cable para conexión Ethernet

Un buen vídeo tutorial para ver cómo hacer un cable Ethernet.
Abónate y no te pierdas otros tutoriales y consejos bajo http://www.youtube.com/channel/UCkNPwUe5wWsfeqRU4dhwFDw?sub_confirmation=1
Con este vídeo tutorial de Clipflip y su canal UtilidadTV os mostramos cómo hacer un cable Ethernet. Si tenéis problemas o dudas con algún calbe ethernet, aquí tenéis este vídeo el cuál os muestra, paso a paso, cómo debéis hacer un cable Ethernet.
¿Tienes un talento o habilidad especial? Enséñalo y gana dinero con clipflip: http://www.clipflip.com/es/

Cómo fabricar un cable Ethernet - Cómo hacer un cable para conexión Ethernet

Phân biệt dây cáp mạng Cat5 và cáp mạng Cat6

Chia sẻ cách phân biệt dây cáp mạng Cat5 và dây cáp mạng Cat6 điều gây khó khăn cho nhiều người chưa biết.
Truy cập Website: https://thegioilinhphukien.com để xem chi tiết thông tin sản phẩm.
Mọi thắc mắc về sản phẩm quý khách hàng xin vui lòng liên:
Công ty Cổ Phần Phát Triển Hợp Nhất
☀ Trụ sở Miền Bắc HOTLINE: 0966 100 110
Địa chỉ: TT17B4 Khu đô thị Văn Quán, Phúc La, Hà Đông, Hà Nội
Số điện thoại: (024) 355 11222 (024) 25510427
☀ Chi nhánh Miền Nam HOTLINE: 0936 559898
Địa chỉ: 108/1/6 Khu Biệt Thự Làng Hoa 1, Cây Trâm, Gò Vấp, Hồ Chí Minh (Đối diện công viên Làng Hoa)
Số điện thoại: (028) 62959899 (028) 62959919

Phân biệt dây cáp mạng Cat5 và cáp mạng Cat6

How To: Terminate an Unshielded Cat6/6A RJ45 Plug

Termination means to attach something to the raw end of the cable so it can be plugged into something else like a switch or computer. This is accomplished several ways, and for this video, we will focus on the quickest, easiest, and most common DoItYourself way…the pass through unshielded RJ45 plug.
Let’s dive into this process, where we will show you how to do it correctly.
For more information on this topic, check out our blog: https://www.truecable.com/blogs/cableacademy/howtoterminateanunshieldedpassthroughrj45connector
We made an updated version of this video viewable at the link below!
If you found this video helpful let us know in the comments and subscribe for more!
Video Time Codes:
[0:120:22] Cutting Cable to Size
[0:221:02] Stripping the Cable
[1:022:05] Prepping Cable \u0026 Removing Spline
[2:052:30] Separating Conductors
[2:303:15] Straightening Out Conductors
[3:154:30] Putting Connectors into T568b Sequence
[4:304:50] Flush Cutting Conductors
[4:506:10] Putting on Pass Through Connector
[6:107:07] Ethernet Cable Ovalization
[7:077:30] Sliding the Connector into the Correct Spot
[7:308:43] Cable Termination \u0026 Double Checking Work
trueCABLE Products Featured in this Video:
Cat6 Riser Unshielded: https://www.truecable.com/products/cat6riserethernetcableunshielded?_pos=1\u0026_sid=5ea8dcd78\u0026_ss=r
Cable Stripping \u0026 Cutting Tool: https://www.truecable.com/products/wirestrippingandcuttingtool
Flush Cutter: https://www.truecable.com/products/flushcutter
Cat6 Pass Through RJ45 Unshielded: https://www.truecable.com/products/cat6rj45passthroughconnectorsunshielded?variant=31471065727043
AllInOne Crimp and Termination Tool: https://www.truecable.com/products/allinonecrimpandterminationtool
All trueCABLE Products: https://www.truecable.com/collections/all
Check out trueCABLE on Social Media!
Instagram: https://www.instagram.com/truecableinc/
Facebook: https://www.facebook.com/truecableinc
TikTok: https://www.tiktok.com/@truecableinc
LinkedIn: https://www.linkedin.com/company/truecable
Learn more in our Cable Academy!

How To: Terminate an Unshielded Cat6/6A RJ45 Plug

How to Wire Up Ethernet Plugs the EASY WAY! (Cat5e / Cat6 RJ45 Pass Through Connectors)

How to make up CAT5e or CAT6 ethernet cables from scratch using RJ45 passthrough connectors, sometimes called EZ Pass Through or Snap Plugs.
Follow Paul on Twitter: https://twitter.com/paulfp
Purchasing Links: (paid)
➡ RJ45 Snap Plug Crimping Tool: https://geni.us/RJ45Crimp
➡ Ethernet Cable Tester: https://geni.us/NetworkCableTester
➡ RJ45 Pass Through / Snap Plugs: https://geni.us/RJ45PassThru
➡ Punch Down Tool: https://geni.us/PunchdownTool
➡ Cat6 Ethernet Cable: https://geni.us/Cat6
➡ Wire Cutters / Snips: https://geni.us/Snips
Learn how to make a network cable (patch lead) and fit an RJ45 connector using a passthrough RJ45 crimping tool for Snap Plugs. This type of RJ45 plug allows the 8 conductors to pass through the end, making it easier to ensure the correct order of the coloured wires (T568A or T568B) and perfect placement inside the jack before crimping.
Now you know how to crimp ethernet cable!
Join this channel to get access to perks:
RJ45 Ethernet SnapPlugs
00:00 Intro \u0026 The problem with regular RJ45 plugs
01:21 Stripping the outer sheathing from the network cable
02:19 Untwist and straighten out all 8 wires
03:09 Organising the colourcoded wires in the correct order
04:03 Sliding on the RJ45 Snap Plug, allowing wires to \”pass through\”
04:55 Crimping the end and trimming the wires
05:24 Testing your home made ethernet cable with network cable tester

Here’s the RJ45 Pinout T568B diagram which was the first result in Google Images in the video demo: https://www.showmecables.com/blog/post/rj45pinout
More reading, T568A vs T568B: https://www.canford.co.uk/TechZone/Article/RJ45ConnectorWiring
Twitter: https://twitter.com/SwitchedOnNet // https://twitter.com/paulfp
Instagram: https://instagram.com/SwitchedOnNetwork // https://instagram.com/paulfp
Facebook: https://facebook.com/SwitchedOnNetwork // https://facebook.com/paulfp
Podcast: http://podfollow.com/switchedonnetwork
Join in the discussion in our Facebook group!
► JOIN Channel for Perks: https://www.youtube.com/SwitchedOnNetwork/join
► Support on PATREON: https://www.patreon.com/SwitchedOnNetwork
► Browse our MERCH: https://teespring.com/stores/switchedonnetwork
► Explore our GEAR: https://kit.co/paulfp
Check out our Amazon Influencer shops!
► UK: https://www.amazon.co.uk/shop/switchedonnetwork
► USA: https://www.amazon.com/shop/switchedonnetwork
We sometimes use free sound effects in our videos from http://www.freesfx.co.uk
Stock video clips are (usually) from VideoBlocks, now called Storyblocks Video. You can get a free trial at https://videoblocks.go2cloud.org/SHFJ
DISCLOSURE: As an Amazon Associate we earn from qualifying purchases.
Copyright © Innobella Media Limited 2021. All Rights Reserved.

How to Wire Up Ethernet Plugs the EASY WAY! (Cat5e / Cat6 RJ45 Pass Through Connectors)

นอกจากการดูบทความนี้แล้ว คุณยังสามารถดูข้อมูลที่เป็นประโยชน์อื่นๆ อีกมากมายที่เราให้ไว้ที่นี่: ดูวิธีอื่นๆMusic of Turkey

ขอบคุณมากสำหรับการดูหัวข้อโพสต์ rj45

See also  [NEW] 2021年最新版|玉森裕太ドラマ一覧!おすすめランキングまとめや無料動画の視聴方法も! | 玉森裕太 出演予定 - Pickpeup

2 thoughts on “[Update] Introduction of the RJ45 Interface | rj45 – Pickpeup”

Leave a Comment