[NEW] The Linux kernel: Signals | linux kernel – Pickpeup

linux kernel: นี่คือโพสต์ที่เกี่ยวข้องกับหัวข้อนี้

Next
Previous
Contents

The common communication channel between user space program and
kernel is given by the system calls. But there is a different channel,
that of the , used both between user processes
and from kernel to user process.

5.1 Sending signals

A program can signal a different program using the kill()
system call with prototype

int kill(pid_t pid, int sig);

This will send the signal with number sig to the process
with process ID pid. Signal numbers are small positive integers.
(For the definitions on your machine, try /usr/include/bits/signum.h.
Note that these definitions depend on OS and architecture.)

A user can send a signal from the command line using the kill
command. Common uses are kill -9 to kill the process
with pid , or kill -1
to force process (maybe init or inetd)
to reread its configuration file.

Certain user actions will make the kernel send a signal to a process
or group of processes: typing the interrupt character (probably Ctrl-C)
causes SIGINT to be sent, typing the quit character (probably
Ctrl-\) sends SIGQUIT, hanging up the phone (modem) sends SIGHUP,
typing the stop character (probably Ctrl-Z) sends SIGSTOP.

Certain program actions will make the kernel send a signal to that process:
for an illegal instruction one gets SIGILL, for accessing nonexisting
memory one gets SIGSEGV, for writing to a pipe while nobody is listening
anymore on the other side one gets SIGPIPE, for reading from the termnal
while in the background one gets SIGTTIN, etc.

More interesting communication from the kernel is also possible.
One can ask the kernel to be notified when something happens
on a given file descriptor. See fcntl(2).
And then there is ptrace(2) – see below.

A whole group of signals is reserved for real-time use.

5.2 Receiving signals

When a process receives a signal, a default action happens, unless
the process has arranged to handle the signal. For the list of
signals and the corresponding default actions, see signal(7).
For example, by default SIGHUP, SIGINT, SIGKILL will kill the process;
SIGQUIT will kill the process and force a core dump;
SIGSTOP, SIGTTIN will stop the process;
SIGCONT will continue a stopped process;
SIGCHLD will be ignored.

Traditionally, one sets up a handler for the signal using
the signal system call with prototype

typedef void (*sighandler_t)(int);
sighandler_t signal(int sig, sighandler_t handler);

This sets up the routine handler() as handler for signals
with number sig. The return value is (the address of)
the old handler. The special values SIG_DFL and SIG_IGN denote the
default action and ignoring, respectively.

When a signal arrives, the process is interrupted, the current
registers are saved, and the signal handler is invoked.
When the signal handler returns, the interrupted activity is
continued.

It is difficult to do interesting things in a signal handler,
because the process can be interrupted in an arbitrary place,
data structures can be in arbitrary state, etc.
The three most common things to do in a signal handler are
(i) set a flag variable and return immediately, and (ii) (messy)
throw away all the program was doing, and restart at some
convenient point, perhaps the main command loop or so, and (iii)
clean up and exit.

Setting up a handler for a signal is called “catching the signal”.
The signals SIGKILL and SIGSTOP cannot be caught or blocked or ignored.

The traditional semantics was: reset signal behaviour to SIG_DFL upon
invocation of the signal handler. Possibly this was done to avoid
recursive invocations. The signal handler would do its job and
at the end call signal() to establish itself again as handler.

This is really unfortunate. When two signals arrive shortly after
each other, the second one will be lost if it arrives before
the signal handler is called – there is no counter.
And if it arrives after the signal handler is called, the
default action will happen – this may very well kill the process.
Even if the handler calls signal() again as the very first
thing it does, that may be too late.

Various Unix flavours played a bit with the semantics to improve
on this situation. Some block signals as long as the process has not
returned from the handler. The BSD solution was to invent a new
system call, sigaction() where one can precisely specify
the desired behaviour. Today signal() must be regarded
as deprecated – not to be used in serious applications.

READ  [NEW] 【一撃】パチンコ・パチスロ解析攻略 | 天昇飛躍の極 - Pickpeup

5.4 Blocking signals

Each process has a list (bitmask) of currently blocked signals.
When a signal is blocked, it is not delivered (that is,
no signal handling routine is called), but remains pending.

The sigprocmask() system call serves to change
the list of blocked signals. See sigprocmask(2).

The sigpending() system call reveals what signals
are (blocked and) pending.

The sigsuspend() system call suspends the calling process
until a specified signal is received.

When a signal is blocked, it remains pending, even when otherwise
the process would ignore it.

5.5 Voodoo: wait and SIGCHLD

When a process forks off a child to perform some task, it is probably
interested in how things went. Upon exit, the child leaves an exit status
that should be returned to the parent.
So, when the child finishes it becomes
a – a process that is dead already but does not disappear
yet because it has not yet reported its exit status.

Whenever something interesting happens to the child
(it exits, crashes, traps, stops, continues),
and in particular when it dies, the parent is sent a SIGCHLD signal.

The parent can use the system call wait() or waitpid()
or so, there are a few variations, to learn about the status of its
stopped or deceased children. In the case of a deceased child, as soon as
a status has been reported, the zombie vanishes.

If the parent is not interested it can say so explicitly (before the fork)
using

signal(SIGCHLD, SIG_IGN);

or

struct sigaction act;
act.sa_handler = something;
act.sa_flags = SA_NOCLDWAIT;
sigaction (SIGCHLD, &act, NULL);

and as a result it will not hear about deceased children,
and children will not be transformed into zombies.
Note that the default action for SIGCHLD is to ignore this signal;
nevertheless signal(SIGCHLD, SIG_IGN) has effect, namely
that of preventing the transformation of children into zombies.
In this situation, if the parent does a wait(), this call
will return only when all children have exited, and then returns -1
with set to ECHILD.

It depends on the Unix flavor whether SIGCHLD is sent when
SA_NOCLDWAIT was set. After act.sa_flags = SA_NOCLDSTOP
no SIGCHLD is sent when children stop or stopped children continue.

If the parent exits before the child, then the child is reparented
to init, process 1, and this process will reap its status.

5.6 Returning from a signal handler

When the program was interrupted by a signal, its status (including
all integer and floating point registers) was saved, to be restored
just before execution continues at the point of interruption.

This means that the return from the signal handler is more complicated
than an arbitrary procedure return – the saved state must be restored.

To this end, the kernel arranges that the return from the signal handler
causes a jump to a short code sequence (sometimes called )
that executes a sigreturn() system call. This system call takes
care of everything.

In the old days the trampoline lived on the stack, but nowadays (since 2.5.69)
we have a trampoline in the
vsyscall page,
so that this trampoline no longer is an obstacle in case one wants a
non-executable stack.

For debugging purposes, the ptrace() system call was
introduced. A process can trace a different process, examine or
change its memory, see the system calls done or change them, etc.
The way this is implemented is that the tracing process is notified
each time the traced process does something interesting. Always
interesting is the reception of signals. When the tracing process
specifies this, also excution of system calls, or execution of any
instruction is interesting.

Thus, one has interactive debuggers like gdb, and tracers
like strace. This call is also very useful for hacking
purposes. One can make one’s own program attach to some utility
and subtly change its workings, while the binary of the utility
is unchanged, still has the correct date stamps and md5sum.

Exercise

Exercise

Below a
baby example of the use
of ptrace. This program will list the system calls done by some
existing process (call ./ptrace -p ) or some
subprocess (call ./ptrace some_command, e.g.,
./ptrace /bin/ls -l).
The version below will work only on i386, and only for relatively
recent kernels.

/*
 * ptrace a child - baby demo example - i386 only
 *
 * call: "ptrace command args" to trace command
 *       "ptrace -p N" to trace process with pid N
 */
#include <errno.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <unistd.h>
#include <signal.h>
#include <sys/wait.h>
#include <sys/types.h>
#include <sys/ptrace.h>
#include <linux/user.h>      /* user_regs_struct */
#include <linux/unistd.h>    /* __NR_exit */
#include <linux/ptrace.h>    /* EAX */

#define SIZE(a) (sizeof(a)/sizeof((a)[0]))

/*
 * syscall names for i386 under 2.5.51, taken from <asm/unistd.h>
 */
char *(syscall_names[256]) = {
"exit", "fork", "read", "write", "open", "close", "waitpid", "creat",
"link", "unlink", "execve", "chdir", "time", "mknod", "chmod",
"lchown", "break", "oldstat", "lseek", "getpid", "mount", "umount",
"setuid", "getuid", "stime", "ptrace", "alarm", "oldfstat", "pause",
"utime", "stty", "gtty", "access", "nice", "ftime", "sync", "kill",
"rename", "mkdir", "rmdir", "dup", "pipe", "times", "prof", "brk",
"setgid", "getgid", "signal", "geteuid", "getegid", "acct", "umount2",
"lock", "ioctl", "fcntl", "mpx", "setpgid", "ulimit", "oldolduname",
"umask", "chroot", "ustat", "dup2", "getppid", "getpgrp", "setsid",
"sigaction", "sgetmask", "ssetmask", "setreuid", "setregid",
"sigsuspend", "sigpending", "sethostname", "setrlimit", "getrlimit",
"getrusage", "gettimeofday", "settimeofday", "getgroups", "setgroups",
"select", "symlink", "oldlstat", "readlink", "uselib", "swapon",
"reboot", "readdir", "mmap", "munmap", "truncate", "ftruncate",
"fchmod", "fchown", "getpriority", "setpriority", "profil", "statfs",
"fstatfs", "ioperm", "socketcall", "syslog", "setitimer", "getitimer",
"stat", "lstat", "fstat", "olduname", "iopl", "vhangup", "idle",
"vm86old", "wait4", "swapoff", "sysinfo", "ipc", "fsync", "sigreturn",
"clone", "setdomainname", "uname", "modify_ldt", "adjtimex",
"mprotect", "sigprocmask", "create_module", "init_module",
"delete_module", "get_kernel_syms", "quotactl", "getpgid", "fchdir",
"bdflush", "sysfs", "personality", "afs_syscall", "setfsuid",
"setfsgid", "_llseek", "getdents", "_newselect", "flock", "msync",
"readv", "writev", "getsid", "fdatasync", "_sysctl", "mlock",
"munlock", "mlockall", "munlockall", "sched_setparam",
"sched_getparam", "sched_setscheduler", "sched_getscheduler",
"sched_yield", "sched_get_priority_max", "sched_get_priority_min",
"sched_rr_get_interval", "nanosleep", "mremap", "setresuid",
"getresuid", "vm86", "query_module", "poll", "nfsservctl",
"setresgid", "getresgid", "prctl","rt_sigreturn","rt_sigaction",
"rt_sigprocmask", "rt_sigpending", "rt_sigtimedwait",
"rt_sigqueueinfo", "rt_sigsuspend", "pread", "pwrite", "chown",
"getcwd", "capget", "capset", "sigaltstack", "sendfile", "getpmsg",
"putpmsg", "vfork", "ugetrlimit", "mmap2", "truncate64",
"ftruncate64", "stat64", "lstat64", "fstat64", "lchown32", "getuid32",
"getgid32", "geteuid32", "getegid32", "setreuid32", "setregid32",
"getgroups32", "setgroups32", "fchown32", "setresuid32",
"getresuid32", "setresgid32", "getresgid32", "chown32", "setuid32",
"setgid32", "setfsuid32", "setfsgid32", "pivot_root", "mincore",
"madvise", "getdents64", "fcntl64", 0, "security", "gettid",
"readahead", "setxattr", "lsetxattr", "fsetxattr", "getxattr",
"lgetxattr", "fgetxattr", "listxattr", "llistxattr", "flistxattr",
"removexattr", "lremovexattr", "fremovexattr", "tkill", "sendfile64",
"futex", "sched_setaffinity", "sched_getaffinity",
};

void my_ptrace_void(int request, pid_t pid, void *addr, void *data) {
        int i = ptrace(request, pid, addr, data);
        if (i) {
                perror("ptrace");
                exit(1);
        }
}

/*
 * Since -1 may be valid data, we have to check errno.
 */
int my_ptrace_read(int request, pid_t pid, void *addr, void *data) {
        int i;

        errno = 0;
        i = ptrace(request, pid, addr, data);
        if (i == -1 && errno) {
                perror("ptrace");
                exit(1);
        }
        return i;
}

pid_t pid;      /* the traced program */

/* detach from traced program when interrupted */
void interrupt(int dummy) {
        ptrace(PTRACE_DETACH, pid, 0, 0);
        exit(-1);
}

int got_sig = 0;

void sigusr1(int dummy) {
        got_sig = 1;
}

void my_kill(pid_t pid, int sig) {
        int i = kill(pid, sig);
        if (i) {
                perror("kill");
                exit(1);
        }
}

/*
 * A child stopped at a syscall has status as if it received SIGTRAP.
 * In order to distinguish between SIGTRAP and syscall, some kernel
 * versions have the PTRACE_O_TRACESYSGOOD option, that sets an extra
 * bit 0x80 in the syscall case.
 */
#define SIGSYSTRAP      (SIGTRAP | sysgood_bit)

int sysgood_bit = 0;

void set_sysgood(pid_t p) {
#ifdef PTRACE_O_TRACESYSGOOD
        int i = ptrace(PTRACE_SETOPTIONS, p, 0, (void*) PTRACE_O_TRACESYSGOOD);
        if (i == 0)
                sysgood_bit = 0x80;
        else
                perror("PTRACE_O_TRACESYSGOOD");
#endif
}

#define EXPECT_EXITED   1
#define EXPECT_SIGNALED 2
#define EXPECT_STOPPED  4

void my_wait(pid_t p, int report, int stopsig) {
        int status;
        pid_t pw = wait(&status);

        if (pw == (pid_t) -1) {
                perror("wait");
                exit(1);
        }

        /*
         * Report only unexpected things.
         *
         * The conditions WIFEXITED, WIFSIGNALED, WIFSTOPPED
         * are mutually exclusive:
         * WIFEXITED:  (status & 0x7f) == 0, WEXITSTATUS: top 8 bits
         * and now WCOREDUMP:  (status & 0x80) != 0
         * WIFSTOPPED: (status & 0xff) == 0x7f, WSTOPSIG: top 8 bits
         * WIFSIGNALED: all other cases, (status & 0x7f) is signal.
         */
        if (WIFEXITED(status) && !(report & EXPECT_EXITED))
                fprintf(stderr, "child exited%s with status %d\n",
                        WCOREDUMP(status) ? " and dumped core" : "",
                        WEXITSTATUS(status));
        if (WIFSTOPPED(status) && !(report & EXPECT_STOPPED))
                fprintf(stderr, "child stopped by signal %d\n",
                        WSTOPSIG(status));
        if (WIFSIGNALED(status) && !(report & EXPECT_SIGNALED))
                fprintf(stderr, "child signalled by signal %d\n",
                        WTERMSIG(status));

        if (WIFSTOPPED(status) && WSTOPSIG(status) != stopsig) {
                /* a different signal - send it on and wait */
                fprintf(stderr, "Waited for signal %d, got %d\n",
                        stopsig, WSTOPSIG(status));
                if ((WSTOPSIG(status) & 0x7f) == (stopsig & 0x7f))
                        return;
                my_ptrace_void(PTRACE_SYSCALL, p, 0, (void*) WSTOPSIG(status));
                return my_wait(p, report, stopsig);
        }

        if ((report & EXPECT_STOPPED) && !WIFSTOPPED(status)) {
                fprintf(stderr, "Not stopped?\n");
                exit(1);
        }
}

/*
 * print value when changed
 */
void outlonghex(unsigned long old, unsigned long new) {
        if (old == new)
                fprintf(stderr, "         ");
        else
                fprintf(stderr, " %08lx", new);
}

int
main(int argc, char **argv, char **envp){
        pid_t p0, p;

        if (argc <= 1) {
                fprintf(stderr, "Usage: %s command args -or- %s -p pid\n",
                        argv[0], argv[0]);
                exit(1);
        }

        if (argc >= 3 && !strcmp(argv[1], "-p")) {
                pid = p = atoi(argv[2]);

                signal(SIGINT, interrupt);

                /*
                 * attach to specified process
                 */
                my_ptrace_void(PTRACE_ATTACH, p, 0, 0);
                my_wait(p, EXPECT_STOPPED, SIGSTOP);
                set_sysgood(p);

                /*
                 * we stopped the program in the middle of what it was doing
                 * continue it, and make it stop at the next syscall
                 */
                my_ptrace_void(PTRACE_SYSCALL, p, 0, 0);
        } else {
                void (*oldsig)(int);

                /*
                 * fork off a child that executes the specified command
                 */

                /*
                 * The parent process will send a signal to the child
                 * and do a wait() to wait until the child stops.
                 * If the signal arrives before the child has said
                 * PTRACE_TRACEME, then maybe the child is killed, or
                 * maybe the signal is ignored and we wait forever, or
                 * maybe the child is stopped but we are not tracing.
                 * So, let us arrange for the child to signal the parent
                 * when it has done the PTRACE_TRACEME.
                 */

                /* prepare both parent and child for signal */
                oldsig = signal(SIGUSR1, sigusr1);
                if (oldsig == SIG_ERR) {
                        perror("signal");
                        exit(1);
                }

                /* child needs parent pid */
                p0 = getpid();

                p = fork();
                if (p == (pid_t) -1) {
                        perror("fork");
                        exit(1);
                }

                if (p == 0) {   /* child */
                        my_ptrace_void(PTRACE_TRACEME, 0, 0, 0);

                        /* tell parent that we are ready */
                        my_kill(p0, SIGUSR1);

                        /* wait for parent to start tracing us */
                        while (!got_sig) ;

                        /*
                         * the first thing the parent will see is
                         *  119: sigreturn - the return from the signal handler
                         */

                        /* exec the given process */
                        argv[argc] = 0;
                        execve(argv[1], argv+1, envp);
                        _exit(1);
                }

                /* wait for child to get ready */
                while (!got_sig) ;

                /*
                 * tell child that we got the signal
                 * this kill() will stop the child
                 */
                my_kill(p, SIGUSR1);
                my_wait(p, EXPECT_STOPPED, SIGUSR1);
                set_sysgood(p);

                my_ptrace_void(PTRACE_SYSCALL, p, 0, (void *) SIGUSR1);
        }

        /*
         * trace the victim's syscalls
         */
        while (1) {
                int syscall;
                struct user_regs_struct u_in, u_out;

                my_wait(p, EXPECT_STOPPED, SIGSYSTRAP);

                my_ptrace_void(PTRACE_GETREGS, p, 0, &u_in);
                syscall = u_in.orig_eax;

                fprintf(stderr, "SYSCALL %3d:", syscall);
                outlonghex(-38, u_in.eax);      /* seems constant */
                fprintf(stderr, " %08lx %08lx %08lx",
                        u_in.ebx, u_in.ecx, u_in.edx);
                if (syscall-1 >= 0 && syscall-1 < SIZE(syscall_names) &&
                    syscall_names[syscall-1])
                        fprintf(stderr, " /%s", syscall_names[syscall-1]);
                fprintf(stderr, "\n");

                if (syscall == __NR_execve) {
                        long *regs = 0; /* relative address 0 in user area */
                        long eax;

                        my_ptrace_void(PTRACE_SYSCALL, p, 0, 0);
                        my_wait(p, EXPECT_STOPPED, SIGSYSTRAP);

                        /*
                         * For a successful execve we get one more trap
                         * But was this call successful?
                         */
                        eax = my_ptrace_read(PTRACE_PEEKUSER, p, &regs[EAX],0);
                        if (eax == 0) {
                                fprintf(stderr, "SYSCALL execve, once more\n");

                                /* the syscall return - no "good" bit */
                                my_ptrace_void(PTRACE_SYSCALL, p, 0, 0);
                                my_wait(p, EXPECT_STOPPED, SIGTRAP);
                        }
                } else {
                        /* wait for syscall return */
                        my_ptrace_void(PTRACE_SYSCALL, p, 0, 0);
                        if (syscall == __NR_exit ||
                            syscall == __NR_exit_group) {
                                my_wait(p, EXPECT_EXITED, 0);
                                exit(0);
                        }
                        my_wait(p, EXPECT_STOPPED, SIGSYSTRAP);
                }

                my_ptrace_void(PTRACE_GETREGS, p, 0, &u_out);
                fprintf(stderr, " RETURN %3d:", syscall);
                outlonghex(u_in.eax, u_out.eax);
                outlonghex(u_in.ebx, u_out.ebx);
                outlonghex(u_in.ecx, u_out.ecx);
                outlonghex(u_in.edx, u_out.edx);
                fprintf(stderr, "\n");

                my_ptrace_void(PTRACE_SYSCALL, p, 0, 0);
        }
        return 0;
}

A tracee gets sent a SIGTRAP signal (and stops) when it successfully does an
execve system call. This means that we see execve
three times (on exit, on return, on SIGTRAP). This signal can be used
to synchronize on, instead of the above complicated SIGUSR1 construction.

READ  [Update] 영화 올드 가드 후기 샤를리즈 테론 | 마르완 켄자리 - Pickpeup
READ  [NEW] Công nghệ Blockchain là gì? [Tất tần tật kiến thức bạn cần biết] | blockchain - Pickpeup

5.8 The Linux “parent death” signal

For each process there is a variable pdeath_signal,
that is initialized to 0 after fork() or clone().
It gives the signal that the process should get when its parent dies.

This variable can be set using

        prctl(PR_SET_PDEATHSIG, sig);

and read out using

        prctl(PR_GET_PDEATHSIG, &sig);

This construct can be used in thread libraries: when the
manager thread dies, all threads managed by it should
clean up and exit. E.g.:

        prctl(PR_SET_PDEATHSIG, SIGHUP);        /* set pdeath sig */
        if (getppid() == 1)                     /* parent died already? */
                kill(getpid(), SIGHUP);

Next
Previous
Contents


Mình không còn muốn quay lại Windows nữa!!! (1 THÁNG LINUX)


Sau 1 tháng dùng Linux, mình nhận ra đây thực sự là hệ điều hành xứng đáng để trải nghiệm. Mình thích nhất khả năng tùy biến giao diện của nó, ngoài ra Linux LXDE cũng là tia hi vọng cứu sống những chiếc máy đã quá cũ kỹ, và còn rất nhiều lý do thú vị khác nữa mà càng trải nghiệm người dùng sẽ càng khám phá được nhiều hơn.
Lý do bạn nên bắt đầu dùng Linux p1: https://youtu.be/CMfo7pUkB0
Game trên Linux: https://youtu.be/LccciboI7jY
_
YOUTUBE:
Subcribe kênh đánh giá điện thoại có tâm và trọng tâm \”a Phone\”: https://www.youtube.com/c/aphonevn?sub_confirmation=1
Subcribe kênh \”Thinkview\”: https://www.youtube.com/thinkview?sub_confirmation=1
_
THEO DÕI:
Page: http://fb.com/ThinkView.VN
Web: http://thinkview.vn
Group: http://fb.com/groups/ThinkView
Instagram: https://www.instagram.com/think.view/
ĐỘI NGŨ:
Quốc Hưng: http://fb.com/hungquockhuc
Tuấn Anh: http://fb.com/tuananh.phansy
LIÊN HỆ:
Phone: 0918 660 468 0986 469 681 (Tuấn Anh)
Email: hi@thinkview.vn

นอกจากการดูบทความนี้แล้ว คุณยังสามารถดูข้อมูลที่เป็นประโยชน์อื่นๆ อีกมากมายที่เราให้ไว้ที่นี่: ดูความรู้เพิ่มเติมที่นี่

Mình không còn muốn quay lại Windows nữa!!! (1 THÁNG LINUX)

الحلقة الثانية : ما هو Linux Kernel


ما هو Linux Kernel
الفرق بين Linux و Windows
Arch Linux

الحلقة الثانية : ما هو Linux Kernel

Watch kernel deveoper do Linux kernel development 😉


Linux stable security development t2sde Ad: Single Board Computer \u0026 more @Amazon: https://services.exactcode.de/amzn.cgi?index=electronics\u0026keywords=SBC You can support my work at: https://patreon.com/renerebe https://github.com/sponsors/rxrbln/ http://onlyfans.com/renerebe
https://exactcode.com https://t2sde.org https://rene.rebe.de

Watch kernel deveoper do Linux kernel development ;-)

How Do Linux Kernel Drivers Work? – Learning Resource


If you want to hack the Kernel, are interested in jailbreaks or just want to understand computers better, Linux Device Drivers is a great book to get you started. I used to learn the basics and in this video I want to share what clicked for me.
LDD Book: https://lwn.net/Kernel/LDD3/
LDD3 Example Code Updated: https://github.com/martinezjavier/ldd3
=[ ❤️ Support ]=
→ per Video: https://www.patreon.com/join/liveoverflow
→ per Month: https://www.youtube.com/channel/UClcEkVhqyiHCcjYwcpfj9w/join
=[ 🐕 Social ]=
→ Twitter: https://twitter.com/LiveOverflow/
→ Website: https://liveoverflow.com/
→ Subreddit: https://www.reddit.com/r/LiveOverflow/
→ Facebook: https://www.facebook.com/LiveOverflow/

How Do Linux Kernel Drivers Work? - Learning Resource

Syscalls, Kernel vs. User Mode and Linux Kernel Source Code – bin 0x09


We will have a look at what syscalls are and what it has to do with the kernel mode an user mode. We do this by exploring a kernel function and trace it down to the assembler level.
join the discussion: https://www.reddit.com/r/LiveOverflow/comments/415sxb/0x09_syscalls_kernel_vs_user_mode_and_linux/
=[ ❤️ Support ]=
→ per Video: https://www.patreon.com/join/liveoverflow
→ per Month: https://www.youtube.com/channel/UClcEkVhqyiHCcjYwcpfj9w/join
=[ 🐕 Social ]=
→ Twitter: https://twitter.com/LiveOverflow/
→ Website: https://liveoverflow.com/
→ Subreddit: https://www.reddit.com/r/LiveOverflow/
→ Facebook: https://www.facebook.com/LiveOverflow/

Syscalls, Kernel vs. User Mode and Linux Kernel Source Code - bin 0x09

นอกจากการดูบทความนี้แล้ว คุณยังสามารถดูข้อมูลที่เป็นประโยชน์อื่นๆ อีกมากมายที่เราให้ไว้ที่นี่: ดูวิธีอื่นๆMusic of Turkey

ขอบคุณที่รับชมกระทู้ครับ linux kernel

Leave a Comment